Linux二进制安装apache2.4.25
安装环境:CentOS 6.2
先检查是否安装了Apache
如通是通过rpm包安装的话直接用下面的命令:rpm -q httpd
也可以使用如下两种方法:
httpd -v
apachectl -v
如果已安装了Apache,则会显示
一。准备环境
1.安装gcc
[root@localhost /]# yum install gcc gcc-c++
2.安装apr,apr-util
下载apr-1.4.6.tar.gz与apr-util-1.5.1.tar.gz,地址:http://apr.apache.org ,上传至/usr/local,安装目录分别为/usr/local/apr 与/usr/local/apr-util
a.安装apr-1.4.6.tar.gz
[root@localhost local]# mkdir -p apr
[root@localhost local]# tar -zxf apr-1.4.6.tar.gz
[root@localhost local]# cd apr-1.4.6
[root@yahoo apr-1.4.6]# ./configure --prefix=/usr/local/apr
[root@yahoo apr-1.4.6]# make
[root@yahoo apr-1.4.6]# make install
b.安装apr-util-1.5.1.tar.gz
[root@localhost local]# mkdir -p apr-util
[root@localhost local]# tar -zxf apr-util-1.5.1.tar.gz
[root@localhost local]# cd apr-util-1.5.1
[root@yahoo apr-util-1.5.1]# ./configure --prefix=/usr/local/apr-util -with-apr=/usr/local/apr/bin/apr-1-config
[root@yahoo apr-util-1.5.1]# make
[root@yahoo apr-util-1.5.1]# make install
3.安装pcre-8.20.tar.gz
下载地址:http://sourceforge.net/projects/pcre/files/pcre/ ,上传至/usr/local,安装目录为/usr/local/pcre
[root@localhost local]# mkdir -p pcre
[root@localhost local]# tar -zxf pcre-8.20.tar.gz
[root@localhost local]# cd pcre-8.20
[root@yahoo pcre-8.20]# ./configure --prefix=/usr/local/pcre
[root@yahoo pcre-8.20]# make
[root@yahoo pcre-8.20]# make install
二。安装apache
1.下载httpd-2.4.25.tar.gz,地址是:http://httpd.apache.org/ ,上传至/usr/local,安装目录为/usr/local/apache2
2.安装
[root@localhost local]# mkdir -p /usr/local/apache2
[root@localhost local]# tar zxvf httpd-2.4.25.tar.gz
[root@localhost local]# cd httpd-2.4.25
[root@localhost httpd-2.4.25]# ./configure --prefix=/usr/local/apache2 --with-pcre=/usr/local/pcre --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util
[root@localhost httpd-2.4.25]# make
[root@localhost httpd-2.4.25]# make install
[root@localhost httpd-2.4.25]# /usr/local/apache2/bin/apachectl start
用浏览器访问http://localhost,看到It works!,说明CentOS Apache安装成功了,恭喜您!
3.启动
第一种方法[root@localhost apache2]# /usr/local/apache2/bin/apachectl start 一定要是绝对路径
第二种方法[root@localhost apache2]#service httpd start
第二种方法[root@localhost apache2]#/etc/init.d/httpd start
三。安装出现的问题
1.configure: error: no acceptable cc found in $PATH
解决办法:yum install gcc gcc-c++
2.configure: error: APR not found. Please read the documentation.
解决方法:安装Apache的关联软件
如上安装apr-1.4.6.tar.gz
3.configure: error: APR-util not found. Please read the documentation
解决方法:安装apr-util
如上安装apr-util-1.5.1.tar.gz
4.configure: error: APR version 1.3.0 or later is required
主要是因为apr版本过低造成的,应该卸载相关旧版本
5. 启动时报错:
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
解救办法:绝对路径即可:/usr/local/apache2/bin/apachectl start
要想彻底不显示此行解决方法:
apache/conf/httpd.conf
首先找到ServerName(约213行),将其设置为localhost:80,并将前面的井号删除,虽然这一步如果不修改的话也可以正常运行,但启动Apache服务时会有一条烦人的提示(AH00558: httpd.exe: Could not reliably determine the server's fully qualified do main name, using fe80::fc76:abca:e24b:d490. Set the 'ServerName' directive globally to suppress this message)
6.安装完apache时,访问时Index of /,为什么不是it works
让别人知道你的网站目录结构直接查看你目录下的所有文件是很危险的一个事情。
下面介绍解决方法
apache/conf/httpd.conf
找到:
Options indexes FollowSymLinks
改为:
Options FollowSymLinks
当直接访问某个目录时显示下图就表明设置成功了。
7.重启apache时,报:DocumentRoot must be a directory
原因:apache/confi/httpd.conf里面有DocumentRoot配置文件,但实际目录中又没有这个目录,注释此配置即可。
8.[root@localhost conf]# /usr/local/apache2/bin/apachectl start
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using localhost.localdomain. Set the 'ServerName' directive globally to suppress this message
(98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
(98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
AH00015: Unable to open logs
解决方法:apache2/conf/httpd.conf Listener 80改为其它的端口号即可。
四。重要配置文件目录
/etc/httpd/conf/httpd.conf 最主要的配置文件
/usr/lib/httpd/modules:apache 支持很多的模块,所以你想要使用的模块默认都放置在此目录
/var/log/httpd apache默认的log
/var/www/html cenos默认的首页所在目录
五。配置apache,最后修改httpd.conf,使apache能使用php
增加如下参数
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
AddType image/x-icon .ico
DirectoryIndex index.php index.html index.html.var
相关推荐
Apache 2.4.25 X86 免安装版
绿色版本,解压后需要自己配置
apache server 2.4.25 64位
主要为大家详细介绍了Ubuntu 16.04源码编译安装Apache 2.4.25,具有一定的参考价值,感兴趣的小伙伴们可以参考一下
中星微在Linux2.4下的驱动,可以直接用
subversion-1.9.5+apache-2.4.25安装步骤及安装包
Apache httpd 2.4.25 Released,Update 2016-12-20.The Apache HTTP Server Project is pleased to announce the release of version 2.4.25 of the Apache HTTP.
Apache配置详解(最好的APACHE配置教程
Apache ( httpd-2.4.25.tar.gz5)
Apache httpd 2.4.25 Released,Update 2016-12-20.The Apache HTTP Server Project is pleased to announce the release of version 2.4.25 of the Apache HTTP.
apache-2.4.25,subversion-1.9.5 MSVC2015 v140_xp编译包含Include和Lib 软件包内容: CSDN-tags: apache svn openssl lua cyrus-sasl-2.1.25 httpd-2.4.25 libiconv-1.9.1 libintl-0.18.1.1 libxml2-2.9.4 lua-...
apache-2.4.25,subversion-1.9.5 MSVC2015 v140编译包含Include和Lib 软件包内容: CSDN-tags: apache svn openssl lua cyrus-sasl-2.1.25 httpd-2.4.25 libiconv-1.15 libintl-0.19.8.1 libxml2-2.9.4 lua-5.1.5 ...
Apache负载均衡含Linux和windows版本,其中Linux包含一些Linux系统中安装必须的依赖包: tomcat-connectors-1.2.42-src.tar pcre-8.40.tar.gz httpd-2.4.25.tar.gz apr-util-1.5.4.tar.gz apr-1.5.2.tar.gz等。 并配...
Apache Http Server 2.4.25 win64
很不容易才找到的 亲身试用过 没有问题 !
inux系统:CentOS 6.5 mini版,如果是VMware虚拟机,网卡要求“桥接” 1、编译安装前首先yum 安装...2、因为这次要编译安装httpd2.4.25,此版本需要更高版本的apr和apr-util。 因此要首先编译安装apr和apr-util。 wget
资源来自pypi官网。 资源全名:satella-2.4.25.linux-x86_64.tar.gz
本文讲述了基于 RHEL 6.8 操作系统搭建开发环境...GCC 4.9.3、 Qt 5.7、 Apache 2.4.25、 MySQL 5.6.35。 本文同时适用于在 Linux 主机无互联网环境下搭建开发环境, 只需要将所需安装包下载 后拷贝到 Linux 主机即可。
httpd-2.4.25源码压缩包,方便进行移植开发和学习。tar -jxvf httpd-2.4.25.tar.bz2解压